Which of the following projections will project the dens within the shadow of the foramen magnum?

1

On average, how many separate bones make up the adult vertebral column?

2

The spinal cord tapers off to a point distally at the vertebral level of:

3

Which of the following is the first compensatory spinal curvature to develop in the young child?

4

Scoliosis is defined as an abnormal or exaggerated _____ curvature

5

The bony structures connected directly to the vertebral body are the:

6

The most posterior aspect of a typical vertebra is the:

7

The joints between articular processes of vertebra are termed _____ joints.

8

Which aspect of the intervertebral disk is composed of semigelatinous material?

9

Kyphosis is defined as a(n):

abnormal thoracic curvature with increased convexity.

10

Which of the following statements is true?

All thoracic vertebrae have at least one facet for rib articulation.

11

Which of the following statements is true for a typical adult vertebra?

The transverse processes extend laterally from the junction of the pedicles and laminae.

12

Which of the following features makes the cervical vertebra unique as compared with other vertebrae of the spine?

Transverse foramina and double (bifid) tips on spinous processes

b. Overlapping vertebral bodies

c. Presence of zygapophyseal joints All of the above

13

Where is the articular pillar located on a cervical vertebra?

Between the superior and inferior articular processes

14

Which term best defines or describes the vertebral body of C1?

There is no vertebral body at C1.

15

Which of the following thoracic vertebra(e) possess no facets for costotransverse joints?

16

The zygapophyseal joints for the typical cervical vertebra lie at an angle of ____ in relation to the midsagittal plane.

17

The most prominent aspect of the thyroid cartilage corresponds to the vertebral level of:

18

The zygapophyseal joints for the thoracic spine lie at an angle of ____ in relation to the midsagittal plane.

19

T2-3 intervertebral disk space is found at the level of the:

20

The gonion corresponds to the vertebral level of:

21

The xiphoid process corresponds to the vertebral level of:

22

Along with increasing the source image receptor distance (SID), what other factor(s) will improve spatial resolution for lateral and oblique projections of the cervical spine?

23

Which of the following pathologic conditions is defined as “a condition of the spine characterized by rigidity of a vertebral joint”?

24

Which of the following clinical conditions will require a decrease in manual technical factors?

25

Which factor is most important to open up the intervertebral joint spaces for a lateral thoracic spine projection?

Keep vertebral column parallel to tabletop.

26

Which position or projection of the cervical spine will best demonstrate the zygapophyseal joint spaces between C1 and C2?

27

Along with the upper incisors, what other bony landmark must be aligned for the AP open-mouth projection?

28

How much CR angulation is required for the AP axial projection for the cervical spine?

29

Why are the anterior oblique projections (right anterior oblique [RAO]/left anterior oblique [LAO]) preferred over the posterior oblique projections of the cervical spine?

To reduce the thyroid dose

30

Which of the following positions will demonstrate the left intervertebral foramina of the cervical spine?

31

Which of the following projections will best demonstrate the zygapophyseal joints of the cervical spine?

32

Which of the following is NOT a correct evaluation criterion for the AP axial C spine projection?

C3 to T2 vertebral bodies should be visualized.

b. Spinous processes are seen to be equal distances from the vertebra body lateral borders.c. Center of the collimation field is at C4. d.All of the above are correct criteria.

33

Which of the following factors does not apply to a lateral projection of the cervical spine?

Suspend respiration upon full inspiration

34

The chin is extended for a lateral projection of the cervical spine to:

prevent superimposition of the mandible upon the spine.

35

The PA projection (Judd method) is intended to demonstrate the atlantoaxial joints between C1 and C2.

36

The posterior cervical oblique projections demonstrate the intervertebral foramina and pedicles on the side closest to the image receptor

37

The AP axial-vertebral arch projection may be performed to better demonstrate the:

articular pillars of C4-7.

38

What type of CR angle is recommended when performing the AP axial C spine projection erect?

39

What type of CR angle is required for posterior oblique (left posterior oblique [LPO]/right posterior oblique [RPO]) positions of the cervical spine?

40

Which of the following factors will enhance the visibility of the vertebral bodies during a lateral projection of the thoracic spine?

Use a breathing technique.

41

Which of the following positions will best demonstrate the left zygapophyseal joints of the thoracic spine?

42

How much rotation of the body is required for an LAO projection of the thoracic spine (from the plane of the table)?

43

Which of the following projections will project the dens within the shadow of the foramen magnum?

AP projection (Fuchs method)

44

A radiograph of an AP open-mouth projection of the cervical spine reveals that the zygapophyseal joints are not symmetric. No fracture or subluxation is present. Which one of the following positioning errors most likely led to this radiographic outcome?

45

A radiograph of an AP axial projection of the cervical spine reveals that the intervertebral joints are not open. The following analog factors were used for this projection: 5 cephalad angle, 40-inch (100 cm) SID, grid, slight extension of the skull, and the CR centered to the thyroid cartilage. Which of the following modifications should be made during the repeat exposure?

Increase the CR angulation.

46

A radiograph of an AP thoracic spine projection reveals that the upper thoracic spine is overexposed. The lower vertebrae have acceptable density and contrast. Which one of the following modifications will improve the visibility of the upper thoracic spine?

Use a compensating (wedge) filter.

47

A radiograph of a lateral thoracic spine reveals that there is excessive density along the posterior aspect of the spine. Even with good collimation, the scatter radiation reaching the image receptor obscures the spinous processes. What can the technologist do to improve the visibility of the posterior elements of the spine?

Place a lead mat on the tabletop just posterior to the patient.

48

A radiograph of an AP open-mouth projection reveals that the base of the skull is superimposed over the dens. What positioning error led to this radiographic outcome?

Excessive extension of the skull

49

A radiograph of a lateral projection of the cervical spine reveals that the ramus of the mandible is superimposed over the spine. What could the technologist have done to prevent this?

Increase the extension of the skull.

50

A radiograph of an RAO of the cervical spine reveals that the lower intervertebral foramina are not open. The upper vertebral foramina are well visualized. Which positioning error most likely lead to this radiographic outcome?

Insufficient rotation of the upper body

51

A patient comes to the radiology department for a cervical spine routine. The study is ordered for nontraumatic reasons.The AP open-mouth projection reveals that the base of the skull and upper incisors are superimposed, but they are obscuring the upper portion of the dens. On the repeat exposure, what should the technologist do to demonstrate the entire dens?

Perform the Fuchs or Judd method.

52

A patient enters the emergency department (ED) because of a motor vehicle accident (MVA). The patient is on a backboardand wearing a cervical collar. The technologist is concerned about the artifacts that the collar will project on the spine during the horizontal beam lateral projection. What should the technologist do in this situation?

Leave the collar on during the exposure.

53

A lateral projection of the thoracic spine reveals that the upper aspect, which is a primary area of interest on this patient, is obscured by the patient’s shoulders. Which of the following changes will best demonstrate this region of the spine?

Perform a cervicothoracic (swimmer’s) lateral position.

54

A patient enters the ED with a cervical spine injury as a result of a fall. The initial horizontal beam lateral projection reveals no subluxation or fracture. The ED physician is concerned about a whiplash injury. Which of the following routines would be most helpful in diagnosing this type of injury?

Patient in hyperflexion and hyperextension lateral positions

55

A patient comes to radiology for a thoracic spine routine. The patient has a history of arthritis of the spine. The radiologist requests that additional projections be taken to demonstrate the zygapophyseal joints. What positions and/or projections would be ideal to demonstrate these structures?

56

An RPO position of the cervical spine requires a 45 oblique of the body with a 15 caudad CR angle.

57

Another term for a breathing technique during exposure is the orthostatic technique.

58

The anterior oblique thoracic spine demonstrates the upside zygapophyseal joints.

59

For an average-size adult, which of the following would receive the highest skin dose?

60

The thyroid dose for a posterior cervical oblique is ____ greater than that of the anterior oblique.

61

A digital (CR) image taken of a lateral thoracic spine projection demonstrates poor visibility of the spine. The image was taken on a full 14  17-i) IR. The following factors were used during the exposure: 80 kV, 80 mAs, 40-inch (102 cm) SID, and collimation to the size of the IR. Which one of the following modifications will result in a more diagnostic image?

62

A patient comes to radiology for a follow-up study of the cervical spine. The patient had spinal fusion between C5-6 performed 6 months earlier. His physician wants to assess the cervical spine for anteroposterior mobility. Which of the following projections would provide this assessment?

Hyperflexion and hyperextension projections

63

Which of the following projections will best demonstrate a compression fracture of the thoracic spine

64

Which imaging modality will best demonstrate herniated nucleus pulposus in the cervical spine

Magnetic resonance imaging (MRI)

65

A patient enters the ED due to an MVA. He is on a backboard and in a cervical collar. The initial lateral cervical spine projection demonstrates C1 to C6. The patient has broad and thick shoulders. Because the hospital is in a rural setting, no CT scanner is available. Which of the following modifications would best demonstrate the lower cervical spine?

Perform the horizontal beam cervicothoracic (swimmer’s) lateral position.

66

A patient comes to radiology for a follow-up study for a clay shoveler’s fracture. Which of the following projections will best demonstrate the extent of this fracture?

71

Typical cervical vertebra

Which position or projection of the cervical spine will best demonstrate the Zygapophyseal joint spaces between C1 ND C2?

Cervical & Thoracic Spine.

Which position or projection of the cervical spine will best demonstrate the Zygapophyseal joint spaces between C1 and C2 quizlet?

The PA projection (Judd method) is intended to demonstrate the zygapophyseal joint between C1 and C2. The posterior cervical oblique projections demonstrate the intervertebral foramina and pedicles on the side closest to the image receptor.

Which of the following is the best projection for demonstrating the intervertebral foramina of the thoracic spine?

Cards
Term Which two vertebral curvatures are anteriorly concave?
Definition Thoracic and sacral(pelvic)
Term Which projection best demonstrates the intervertebral foramina of the thoracic vertebral column?
Definition Lateral Projection
C, T, and L Spine Flashcardswww.flashcardmachine.com › ctand-l-spinenull

Which cervical vertebrae has a bony projection called the dens process on it?

Description. The odontoid process (also dens or odontoid peg) is a protuberance (process or projection) of the Axis (second cervical vertebra). It exhibits a slight constriction or neck, where it joins the main body of the vertebra.