Explanation:SLAAC uses ICMPv6 messages when dynamically assigning an IPv6 address to a host. DHCPv6 is an alternate method of assigning an IPv6 addresses to a host. ARPv6 does not exist. Neighbor Discovery Protocol (NDP) provides the functionality of ARP for IPv6 networks.
UDP is the transport layer protocol used by DHCPv6.Which protocol supports Stateless Address Autoconfiguration (SLAAC) for dynamic assignment of IPv6 addresses to a host?
For All Questions: CCNA1 ITN Chapter 7 Exam Answers 2019
Which protocol supports stateless address autoconfiguration for dynamic assignment of IPv6?
DHCPv6 (The Dynamic Host Configuration Protocol version 6) - The most widely adopted protocol for dynamically assigning addresses to hosts. Requires a DHCP server on the network and additional configuration.
Which protocol supports stateless address autoconfiguration Slaac for?
Neighbor Discovery Protocol (NDP) is one of the core protocol in IPv6 network. It provides facilities like Stateless Address Autoconfiguration (SLAAC), Neighbor unreachability Detection (NUD), address resolution (similar to ARP in IPv4) etc.
Which protocol does Slaac support for dynamically assigning host IPv6 addresses?
Answers Explanation & Hints: SLAAC uses ICMPv6 messages when dynamically assigning an IPv6 address to a host.
What is IPv6 stateless address autoconfiguration?
Stateless address autoconfiguration is the process that IPv6 nodes (hosts or routers) use to automatically configure IPv6 addresses for interfaces.