Java Games: Flashcards, matching, concentration, and word search. | ||
Tools
- Copy this to my account
- E-mail to a friend
- Find other activities
- Start over
- Help
Students will be able to list the steps of procedures for a pedicure and identify precautions and safety measures
for the service.
Pedicure procedures include trimming, shaping, and polishing toenails; exfoliating skin; and | foot massage services |
To ensure healthy, happy feet, professional pedicure services should be performed | monthly |
A pedicure tool used to exfoliate dry skin or smooth calluses is a | paddle |
A pedicuring service should include a comfortable chair for the client, a footrest for the client, and a(n) | ergonomic chair for the nail professional |
To be effective in a pedicure bath, liquid soaps should contain a(n) | mild detergent |
Lotions, oils, and creams are used to condition and moisturize feet and for | performing a foot massage |
A metal file that is designed to be used in a specific fashion is a | rasp |
The tool used to exfoliate dry skin or smooth calluses during a pedicure service is a | foot file |
When working on the foot, if should be grasped between the thumb and fingers at the | mid-tarsal area |
The actual pedicure procedure has five basic steps: the soak, nail care, skin care, | massage, and polish |
When performing a pedicure, apply a firm grip on the client's foot to | calm the client |
When clipping the toenails, extra care should be exercised to avoid breaking the | hyponychium |
To properly disinfect a foot spa after each pedicure service, the nail technician is required to perform the following steps | drain and remove water and contaminants, clean surface, disinfect with approved disinfectant, rinse, and dry. |
The procedure for cleaning a foot spa at the end of the day is remove and clean screen of trapped debris, wash screen and inlet and totally immerse in approved disinfectant, then | flush system with low-sudsing soap and water for 10 minutes, rinse, drain, and dry. |
The weekly maintenance procedure for foot spas requires the disinfectant solution to remain in the foot spa at least | 6 to 10 hours |
|
|
About this fact sheet
Foot spas (foot baths with a whirlpool action or water jets) need to be thoroughly cleaned and disinfected to prevent the growth and spread of disease-causing microorganisms. Microorganisms can grow on moist, unclean, or contaminated surfaces.
Foot spas have been linked to bacterial outbreaks, particularly non-tuberculous mycobacteria, which can cause skin infections and inflammation of the lymph nodes. Poor cleaning and disinfection practices can lead to a build-up of contaminants (dirt, skin, and organic material) in the filters and jets, allowing microorganisms to multiply and recirculate in the foot spa water.
To minimise the spread of infectious diseases, a single-use disposable foot spa liner can be used. Operators need to check clients’ feet for signs of broken skin (for example, blisters) or infection (for example, tinea) and if found, the procedure should not be performed.
Foot spas must be cleaned and disinfected between each client and at the end of the day.
How to clean and disinfect a foot spa?
Always follow the manufacturer's instructions for cleaning and disinfection.
After each client:
- Drain the water from the foot spa.
- Clean the surfaces of the foot spa with detergent and warm water using a clean cloth or single-use towel to remove all contamination.
- Disinfect by spraying the foot spa with a hospital grade disinfectant.
- Re-circulating 'air-jet' spas need to be disinfected by circulating clean water and disinfectant following the manufacturer's instructions.
- After disinfection, wipe the foot spa dry using a clean lint free cloth. A different clean cloth should be used after each new client.
At the end of the day:
- Remove the foot spa components (inlet jets, filter screen) using gloves and thoroughly scrub the foot spa and components with a brush, warm water and a suitable cleaning agent.
- Immerse the filter and other components in a hospital grade disinfectant solution for at least 10 minutes.
- Rinse the foot spa and components with clean water and re-assemble.
- Re-fill with clean water and disinfectant. For re-circulating 'air-jet' spas the disinfectant solution must be circulated for the contact time set by the manufacturer, or for at least 10 minutes. A longer contact time is more likely to kill bacteria and other disease-causing microorganisms.
- After disinfecting, drain, rinse and dry.
- Store the foot spa in a clean, dry and dust free area.
- Any re-useable cloths should be washed in detergent and hot water and dried thoroughly.
Once a week:
The foot spa and all of it components must be soaked in disinfectant overnight.
Chemical storage
Cleaning products and other chemicals should always be stored in their original containers, with their lids closed, in line with the manufacturer's directions, and work health and safety requirements. A copy of the safety data sheet should be available in the business.
Further advice
- Contact your local council.
- Contact your local Public Health Unit by calling 1300 066 055.