Tools Show
Students will be able to list the steps of procedures for a pedicure and identify precautions and safety measures
About this fact sheetFoot spas (foot baths with a whirlpool action or water jets) need to be thoroughly cleaned and disinfected to prevent the growth and spread of disease-causing microorganisms. Microorganisms can grow on moist, unclean, or contaminated surfaces. Foot spas have been linked to bacterial outbreaks, particularly non-tuberculous mycobacteria, which can cause skin infections and inflammation of the lymph nodes. Poor cleaning and disinfection practices can lead to a build-up of contaminants (dirt, skin, and organic material) in the filters and jets, allowing microorganisms to multiply and recirculate in the foot spa water. To minimise the spread of infectious diseases, a single-use disposable foot spa liner can be used. Operators need to check clients’ feet for signs of broken skin (for example, blisters) or infection (for example, tinea) and if found, the procedure should not be performed. Foot spas must be cleaned and disinfected between each client and at the end of the day. How to clean and disinfect a foot spa?Always follow the manufacturer's instructions for cleaning and disinfection. After each client:
At the end of the day:
Once a week:The foot spa and all of it components must be soaked in disinfectant overnight. Chemical storageCleaning products and other chemicals should always be stored in their original containers, with their lids closed, in line with the manufacturer's directions, and work health and safety requirements. A copy of the safety data sheet should be available in the business. Further advice
What steps must be followed immediately after each pedicure?2. What are the basic steps to properly disinfect a foot spa after each pedicure service? Drain and remove water and contaminants, clean surface, disinfect with approved disinfectant, rinse, and dry. 4.
What solution is used to disinfect foot spa basin after each use?After each client:
disinfectant product that is tuberculocidal or mycobacteriacidal. Follow the manufacturer's instructions for use and contact time. Alternately, a bleach solution made up of 4 tsp (20mL) of household 5.25% bleach mixed with 2 cups (500mL) of water may be sprayed on all removable parts and basin.
How often should a pedicure tub be cleaned and disinfected?Note: A single use disposable liner may also be used; however the basin must still be cleaned and disinfected at the end of each day. After each client: 1. Scrub the foot spa with soap and warm water and remove any debris.
What are the steps in the pedicure pre service procedure?The Essential Steps of a Pedicure. Remove Nail Polish. It might seem obvious to remove your current nail polish before starting your pedicure, but many people overlook this first step. ... . Soak Feet. ... . Take Care of Cuticles. ... . Exfoliate. ... . Treat Calluses. ... . Trim and File Nails. ... . Massage Feet/Moisturize. ... . Apply Polish/Let Feet Dry.. |